Beef Equipment

Jarvis Weasand Clips - for sealing the esophagus of slaughtered stock. •Weasand clips are designed for sealing the esophagus of slaughtered beef and sheep. •Made of plastic in the U.S.A. •Designed to keep the esophagus sealed tight during processing procedures. •Shipped in bags of 2000 for optimum hygiene and convenience.

The Jarvis Model 525-TBC -- pneumatically powered cutter for cutting beef tongue bones. •Ideal for cutting the hyoid bone - in all size kills. •Reduces operator fatigue caused by tongue bone clipping with hand shears. •Lightweight and small for maneuverability. •Cuts accurately and quickly - no bone splinters. •Robust and durable construction for long, trouble-free life. •Anti-tie down controls for operator safety.

The Jarvis Model TBC-1 -- pneumatically powered cutter for cutting beef tongue bones. •Ideal for cutting the hyoid bone - in all size kills •Reduces operator fatigue caused by tongue bone clipping with hand shears •Lightweight and small for maneuverability •Cuts accurately and quickly - no bone splinters •Robust and durable construction for long, trouble-free life •Anti-tie down controls for operator safety

Six interchangeable nose pieces for simple, accurate testing of all USSS Stunners. The AST 106 Stun tester gives you fast, accurate testing of Jarvis power load stunners. Featuring a comprehensive data log and intuitive, easy-to-use interface. While complying with the most stringent requirements for audit data collections.

Diverse stunning applications. Simple operation. With even less maintenance. The PAS Type P Penetrating Cartridge Stunners are designed for easy to use, humane stunning on a variety of small to large animal types. With a comfortable, ergonomic handle and ultra-durable construction to reduce the need for maintenance. And different available cartridge strengths depending on usage. AST-106 Stun Tester. For Jarvis PAS Type P and Type C bolt speed measurements. The AST 106 Stun tester gives you fast, accurate testing of Jarvis power load stunners. Featuring a comprehensive data log and intuitive, easy-to-use interface. While complying with the most stringent requirements for audit data collections.

Diverse stunning applications. Simple operation. With even less maintenance. The PAS Type P Penetrating Cartridge Stunners are designed for easy to use, humane stunning on a variety of small to large animal types. With a comfortable, ergonomic handle and ultra-durable construction to reduce the need for maintenance. And different available cartridge strengths depending on usage. AST-106 Stun Tester. For Jarvis PAS Type P and Type C bolt speed measurements. The AST 106 Stun tester gives you fast, accurate testing of Jarvis power load stunners. Featuring a comprehensive data log and intuitive, easy-to-use interface. While complying with the most stringent requirements for audit data collections.

New design. Lighter weight. Faster bolt speed. The USSS-21 renders stunned animals insensible to pain with a one-shot humane, more consistent stunning procedure, due to improved and faster pressurization. With an oblong-shaped stunning rod for easier skull penetration, and 15 to 20% faster bolt speed. All that using 25% less air with no performance loss. Reimagined for the operator. Easy to handle, repair, maintain, and clean. Designed with an improved ergonomic handle for less operator fatigue, and controlling possible injuries. Featuring an auxiliary handle that rotates to the operator’s preference. And two different firing sequences - so there's less chance of activating the stunner accidentally.

The Jarvis Model USSS-1 - pneumatically operated high speed captive bolt stunner for cattle. •One shot humane stunning procedure. Fires only once - no multiple firing. •Better stunning for improved meat quality. •Air operated with no air injection into animal. •Two hand control for safer operation. •Easy to handle and safe to operate - no recoil or kick back. •Easy to repair and clean. •High strength construction. •Lightweight - tool only weighs 30 pounds (13.6 kg).

The largest Jarvis electrically-powered band saw. Purposefully designed for the operator. The BUSTER 5 is used worldwide for splitting fat cattle, bulls, oxen, and horses. Designed to reduce your downtime. With superior blade life of up to 600 carcasses. And an oil bath lubricated drive system for sustained trouble-free operation cut after cut. Featuring spoked wheels, flat-surfaced housings, and completely opening doors - for fast, easy, cleaning. Approved for all national and international hygiene and safety requirements. Increase your yield. Thanks to a 25mm ultra-thin brushed aluminum rail. Maximum visibility is needed to make the most accurate split. So we designed the BUSTER 5 with an ultra-thin 4mm brushed aluminum rail to give the operator more control over the cut and ensure the highest possible yield.

Maximize your yield at all cut depths. The Jarvis JHS pneumatic hand-held skinner features a 0.7 HP motor capable of making precise cuts at 1/16", 1/8", 3/16", and 1/4" depths. Giving you clean, uniform skin removal without knife marks or gashes. And engineered with custom stainless steel components to decrease your total cost of ownership and slash downtime on repairs. Ultimate customization. To fit any application. The JHS accommodates 3 different blade types and 2 sets of ultra-durable tooth rollers suitable for diverse trimming applications of pork, beef, ham, poultry, lamb, turkey, fish, and vegetables. With an adjustable 360-degree rotating handle for improved ergonomics.

Up to 400 beef per hour. The 50-CL quickly and easily severs the loins or forequarters from beef at speeds up to 400 beef per hour per operator. Designed for optimum handling and maneuverability. With anti-tie down controls for improved operator safety. Optimum handling and maneuverability. Robust stainless steel construction, including solid stainless steel blades and a single-piece clevis for best possible hygiene and even lower maintenance. With greaseable pivot points for extended life.

The Jarvis Model EBS-1H -electrically powered horn removal saw for beef, sheep and goats. •Specifically designed for inexpensive removal of beef, sheep and goat horns. •Small and maneuverable for optimum handling. •Economical to own and operate. •1.9 horsepower, totally enclosed, 3 phase motor for optimum performance. •Lightweight - only 53 lbs (24 kg). •Meets international requirements for safety and hygiene.

THE JARVIS MODEL 50-G -- ELECTRIC-HYDRAULIC POWERED GUILLOTINE STYLE DEHORNER. •Cuts both horns of all beef closer to the skull than possible with traditional shear type dehorners. •1.5 second cycle for high speed production. •Eliminates difficulties associated with hide pulling over the head. •Optional clamshell blades yield an even deeper cut, completely under the hom-- ideal for the U.S. second cut. •Best possible hygiene with updated, virtually all stainless steel construction - minimal corrosion problems. •Robust construction for long trouble-free life. •Anti-tie down controls for operator safety. •Meets national and international requirements for safety and hygiene.

The Jarvis Model 80G -hydraulic powered guillotine style dehorner. •Cuts all types of large beef horns closer to the skull than traditional shear type dehorners. •1.5 second cycle for high speed production. •Eliminates difficulties associated with over the head hide pulling. •Best possible hygiene with updated, virtually all stainless steel construction – minimal corrosion problems. •Robust construction. •Anti-tie down controls for operator safety. Meets national and international requirements for safety and hygiene.

The Jarvis Model 500HC -pneumatically powered hock cutter for hind beef hocks and sow hocks. •The 500HC quickly and cleanly cuts rear beef hocks through the joint, and is an effective hock cutter for sows. •Inexpensive - no hydraulic power unit. •Double acting air cylinder for reduced maintenance - no springs. •Lightweight for easy handling. •Anti-tie down controls for operator safety.